Process analytics play a central role in business success for countless industries. Process analyzers make an essential contribution to process and quality optimization and enable environmentally conscious and sustainable production in virtually every industry segment worldwide.



Pumps, fans, compressors, conveyor belts, mixers, mills or extruders: No matter what application, SINAMICS G converters are perfectly adapted to single drives with basic to mid-level control dynamics requirements. The converters are based on the same platform as all other members of this innovative drives family.

Fully enclosed HMI devices

Operator interfaces in IP65 degree of protection



The SIMATIC HMI PRO (PRO = protected) devices have been designed for mounting on a support arm/pedestal. Thanks to their rugged aluminum enclosures, the SIMATIC HMI PRO devices have all-round IP65 protection and are also suitable for use in harsh environments.

As far as functionality and technical specification are concerned the IP65 variants are equal to the corresponding standard devices.

The separation of HMI and control cabinet allows flexible design concepts. The new SIMATIC HMI PRO devices are used wherever the HMI device cannot be installed direct in the control cabinet due to restricted space, or whenever an operator unit is required direct at the machine.

The devices stand out not only due to their compact and appealing industrial design, but also due to their refined mechanical features. This enables the device to be connected to the support arm system optionally from above or below. A host of support arm systems from well-known manufacturers are supported here. The SIMATIC HMI PRO devices are also suitable for connection to systems in accordance with VESA 75 and VESA 100.

SIMATIC MP 377 15 inch Touch

15 inch Multi Panel with a TFT color touch display



Most versatile Multi Panel of the 370 series with a TFT touchscreen display and a resolution of 1024 x 768 pixels. The MP 377 15” Touch is also available in a model with stainless steel front, as a fully enclosed HMI device with IP65 protection rating and as a customized industry product with daylight-readable display.

Range of application

Like all devices of the 370 series, the MP 377 15” Touch is intended for HMI tasks of higher complexity, and for use in PROFIBUS DP networks or PROFINET environments. In addition to providing HMI standard functionality, the application range can be expanded through the WinCC flexible options Smart Access, Smart Service , OPC Server and Audit. Together with the software-PLC WinAC MP, the MP 377 15” Touch forms a combined platform for control and visualization tasks


Ultra compact, rugged and maintenance-free in embedded technology



Particular compact yet high performing Industrial PC in embedded technology with a great variety of operating units. The HMI IPC477C is available an embedded PC-System with pre- installed visualization software WinCC flexible and/or Software PLC WinAC RTX.

A new option is to purchase a turnkey device with WinCC client functionality.Based on the HMI IPC 477C there is also a fully enclosed HMI device in order to be mounted directly on a support arm/pedestal. The IP65 rated devices is available with a 15“ or 19“ touch display.

Range of application

The SIMATIC HMI IPC477C embedded is designed for use directly at the machine, where the focus is on a combination of ruggedness and maximum reliability and the performance and openness of a PC is also required.

Due to the minimal mounting depth, it can also be used in confined spaces.


Ultra compact, rugged and maintenance-free in embedded technology



The new SIMATIC HMI IPC577C is now even more rugged than the predecessors, the Panel PC 577/577B. It offers PC typical openness, as you can choose among different powerful CPUs as well as various storage configurations. The IPC577C is the budget-priced pc-based solution for many HMI applications under industrial environmental conditions

Range of application

The SIMATIC HMI IPC577C embedded is designed for applications close to the machine, where the combination of ruggedness and reliability is as iimportant as the attractive price.

For operation via touch screen, devices with 12", 15" and 19"displays are available


Chassis Units

State-of-the-art Drives Offer Many Advantages
Today's applications demand drive solutions with the optimum performance. Smooth drive performance increases the precision and reduces the stress on machines and plant. A SINAMICS G110 drive is extremely simple to configure and creates low-cost opportunities for optimizing new generations of products and innovative applications. Smooth and continuous speed control, quiet and with small footprint, SINAMICS G110 couples high operational reliability with high service lifetime.


The flexible converter for positining tasks comprising extensive safety functions
In order to perform the highly complex applications in mechanical engineering and plant construction, machine axes must be quickly positioned in a convenient and exact manner. If you wish to get out the positioning task from the higher-level machine controller, the drive must have this function. This is exactly the task of the SINAMICS S110 with its integrated single positionier (EPos).

If you wish to use it as a speed axis, you can predefine setpoint values for the S110 via an analog input or fieldbus interface (Profibus, CAN, Profinet (available soon)). Furthermore, it can activate comprehensive integrated safety functions via on-board safety terminals without complex additional circuits.

As a modular single-axis drive with servo functionality, it covers the performance range from 120 W (1AC 230V) to 90 kW (3AC 400V). Preferably synchronous servo motors equipped with encoder, but also induction motors with/without encoder can be operated with SINAMICS S110.


SIMATIC S7- 200 :

SIMATIC S7-200 applications range from replacing relays and contactors to handling less complex automation tasks in standalone mode, in networks and within distributed configurations.

To save costs, the S7-200 is increasingly being employed in areas that previously required special electronics.

In addition to the comprehensive basic functionality of the five available CPUs a wide range of I/O and function modules provides solutions tailored to the customers requirements. (Siemens S7-200).

SIMATIC S7- 300 :

The SIMATIC S7-300 has been designed for innovative system solutions with the focus on manufacturing engineering, and as a universal automation system, it represents an optimal solution for applications in centralized and distributed configurations: The product range comprises 7 Standard CPUs, 6 Compact CPUs, 6 failsafe CPUs and 2 Technology CPUs. (Siemens S7-300) Highlights

  • The ability to integrate powerful CPUs with Industrial Ethernet/PROFINET interface, integrated technological functions, or fail-safe designs makes additional investments unnecessary.
  • The S7-300 can be set up in a modular configuration without the need for slot rules for I/O modules. There is a wide range of modules available both for the centralized and the distributed configuration with ET 200M.
  • The Micro Memory Card as a data and program memory makes a backup battery superfluous, and with it, part of the maintenance costs. In addition, an associated project, including symbols and comments, can be stored on this memory card to facilitate service calls.
  • The Micro Memory Card also enables simple program or firmware updates. The Micro Memory Card can be used during operation for storing and accessing data, e.g. for measured value archiving or recipe processing.
  • In addition to standard automation, safety technology and motion control can also be integrated in an S7-300.
  • Many of the S7-300 components are also available in a SIPLUS version for external environmental conditions, e.g. extended temperature range (-25 to +60 Deg C) and for use where there is aggressive atmosphere/condensation.

SIWAREX- Weighing Modules :

SIWAREX U and CS now supporting PROFINET

PROFINET is a leading standard within the Ethernet based industrial communication. Our weighing electronics SIWAREX U and SIWAREX CS are now supporting this technology. The communication is realized through appropriate Simatic CPUs and communication modules. (7MH4910-0AA01 , 7MH4950-1AA01 , 7MH4950-2AA01 )

Upgrade of SIWAREX U weighing electronics

With the beginning of March 2008 we are offering an updated SIWAREX U, including some interesting improvements. The SIWAREX U is a versatile weighing module for all simple weighing and force measuring tasks. It is either used centrally in a SIMATIC S7-300 or M7 or decentrally linked via PROFIBUS-DP to an S7-400, SIMATIC S5 or systems of other manufacturers. (7MH4910-0AA01 , 7MH4950-1AA01 )

SIWAREX FTA weighing electronics now certified legal-for-trade across the EU

The appropriate certificate for the SIWAREX FTA has been issued in time for the introduction of the new European Measuring Instruments Directive (MID) in Germany. So the SIWAREX FTA has type-approval certificates, which are valid in all 27 countries of the European Union. (7MH4900-2AA01)

SIMATIC S7- 400 :

The Power Controller for system solutions in the manufacturing and process industries.

Within the Controller family, the SIMATIC S7-400 is designed for system solutions in the manufacturing and process automation.

The product range comprises 9 Standard CPUs, 2 failsafe and 2 high available CPUs. The following features make the SIMATIC S7-400 the most powerful PLC (Siemens S7-400):

  • The S7-400 is especially suitable for data-intensive tasks in the process industry. High processing speeds and deterministic response times guarantee short machine cycle times on high-speed machines in the manufacturing industry. The high-speed backplane bus of S7-400 ensures efficient linking of central I/O modules.
  • The S7-400 is used preferably to coordinate overall plants and to control lower-level communications lines with slave stations; this is guaranteed by the high communication power and the integral interfaces.
  • The power of the S7-400 is scalable thanks to a graded range of CPUs; the capacity for I/O is almost unlimited.
  • The power reserves of the CPUs enable new functions to be integrated without further hardware investment, e.g. processing of quality data, user-friendly diagnosis, integration into higher-level MES solutions or high-speed communication via bus systems.
  • The S7-400 can be structured in a modular way without any slot rules; there is a widely varied range of modules available both for centralized configurations and distributed structures.
  • The configuration of the distributed I/O of the S7-400 can be modified during operation. In addition signal modules can be removed and inserted while live (hot swapping). This makes it very easy to expand the system or replace modules in the event of a fault.
  • The storage of the complete project data including symbols and comments on the CPU simplifies service and maintenance calls
  • Safety technology and standard automation can be integrated into an S7-400 controller; the plant availability can be increased by the redundant set-up of the S7-400.
  • Many of the S7-400 components are also available in a SIPLUS version for external environmental conditions, e.g. extended temperature range (-25 to +60 Deg C) and for use where there is aggressive atmosphere/condensation.


Simatic HMI - Series 77:

The clever way to start - low cost and innovative

With a familiar look and feel but enhanced functionality the successors of the proven Text Panels OP73 and OP77A & OP77B now offer graphics. The budget-priced devices of the series 70 are suited for smaller HMI applications

Simatic HMI - Series 177:

The compact versatile units with comprehensive basic functionality with pixel graphics 6" display for realistic representation of processes (also in color), either as Touch Panels (TPs)or as Operator Panels(OP) with membrane keyboard. Convincing functionality within the compact class as well as graphics capability classify the 177 series devices based on Windows CE.

SIMATIC TP 177A / SIMATIC TP 177B DP mono / SIMATIC TP 177B PN/DP color / SIMATIC TP 177B PN/DP color INOX / SIMATIC OP 177B DP mono / SIMATIC OP 177B PN/DP color

Simatic HMI - Series 277, 377

The all-rounder with optimal power and performance

like the series 177 as Touch- or Operator Panels with even more comfort and performance as 6" devices.

Based on the Windows CE operating system, the series 277 panels TP 277/OP 277 offer innovative operator control and monitoring functions combined with the known advantages of Operator and Touch Panels: Ruggedness, stability and simplicity. SIMATIC Multi Panels - More than just operator control and monitoring

Series 277:

Entry level devices to the class of multifunctional platforms: 8" and 10" devices in Touch and Key versions.

Series 377:

Highest performing Multi Panels with 12", 15" and 19" Touch devices and the MP 377 12" Key.




Logo :

Always right - LOGO! Basic & LOGO! Pure

  • 8 digital inputs (incl. 2 AI at 12/24 V DC) and 4 digital outputs on board 
  • Display of message texts, actual and set point values, as well as direct modification of values on the display (not applicable to Pure models) saves the need for a separate display 
  • Automatic daylight saving adjustment reduces maintenance overheads 
  • Password protection protects your know-how 
  • 36 pre-tested functions integrated, i.e. no additional devices, such as elapsed-hour meters, required 
  • Supports linking of 130 functions so that a wide range of applications can be implemented without restrictions 
  • Integrated data latch ensures total security of current values in the event of a power failure.
  • Supports flexible expansion up to 24 DI, 16 DO, 8 AI, 2 AO; i.e. suitable for a wide range of applications, which means protection of original investment. 

SIMATIC ET 200 Series :

Distributed I/Os with local intelligence

With SIMATIC ET 200 a wide range of distributed I/O systems is available for solutions in the control cabinet or without a control cabinet directly at the machine, ready to be integrated into any automation solution via PROFIBUS or PROFINET.

ET 200S - CPU protection rating IP 20

The IM 151-7 CPU for the ET 200S system can be used in stand-alone mode as well as for distributed automation solutions with a medium-sized program. It corresponds to a CPU 314 and enables distributed preprocessing of the production data locally - even in the failsafe version. It communicates with the higher-level programmable controller over the coexistent MPI/PROFIBUS DP slave interface.

ET 200pro - CPU protection rating IP 65/67

The interface module IM154-8 CPU with CPU functionality is based on the CPU 315-2 PN/DP and offers the same quantitative framework and functions. The IM154-8 CPU has one combined MPI/PROFIBUS DP interface and one PROFINET interface with three ports. The IM 154-8 CPU supports both PROFINET IO (up to 128 IO devices can be connected) and PROFINET CBA, as well as PROFIBUS DP (as master for up to 124 slaves).

AC Drives:

Micro Master Inverters MM4 Series...

Our frequency inverters combine the highest technical quality with versatile functionality: from the basic MICROMASTER 420 to the high-performance MICROMASTER 440 with sensorless vector control and a power range up to 250 kW (300 HP). Each individual member of our MICROMASTER family is characterized by its exceptionally simple handling: from installation and commissioning to operator control. Later adaptation to new requirements is simplicity itself.

Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals. With its default factory settings, it is immediately ready for use.

Part of Totally Integrated Automation (TIA)

All standard Siemens drives with the PROFIBUS option are integrated in TIA. On the basis of TIA three-pronged universality with regard to communication, configuration and data management, our drive systems perform automation tasks smoothly and efficiently, with an energy-saving potential of up to 30 %.

Safe Operation All over the World

All the important protection and overload functions are already standard features of our inverters. And the requirements of the EU low-voltage directive are met by all the devices in the MICROMASTER family. They have the CE label, as well as both UL and CUL certification. So the MICROMASTER family has just about everything.

MICROMASTER 440 0.12 to 250 kW / 0.16 to 350 HP
The all-rounder

MICROMASTER 430 7.5 to 250 kW / 10 to 350 HP
The specialist for pumps and fans

MICROMASTER 420 0.12 to 11 kW / 0.16 to 15 HP
The universal inverter

MICROMASTER 410 0.12 to 0.75 kW / 0.16 to 1.0 HP
The low-price solution


AC Drives:

GV3000/SE 1-400 HP

The multi-purpose Industrial AC Drive that solves 90% of all stand-alone and system variable speed motor needs.

Key Attributes

  • General Purpose (Scalar V/Hz)
  • Sensorless Vector Control (SVC)
  • Flux Vector Control (FVC)
  • Adjustable 2,4 or 8 kHz
  • Isolated analog input (qty 1)
  • Analog Output (qty 1)
  • Isolated digital inputs (qty 1)
  • Analog Output (qty 1)
  • Isolated digital inputs (qty 8 std.)
  • Dynamic response with FVC:
    100 rad/sec (15 Hz)
    1,000 rad/sec (150 Hz) torque
  • Operating Speed Range
    20:1 V/Hz
    120:1 SVC
    1000:1 FVC
  • Steady state speed regulation:
    V/Hz = 1.0%, 20:1 CT range
    SVC = 0.5%, 40:1 CT range
    FVC = 0.01%, 100:1 CT range
    Encoder PPR selection:
    SE, 512, 1024, 2048 & 409

Legacy AC and DC Drives SP500

The SP500 offers the advanced technology to provide high performance and flexibility without the high-cost and complex programming common to many other drive controllers. Because it's available in a water-tight, dust-tight, corrosive resistant enclosure, the SP500 is ideal for the harsh environments found in many processing applications.

Key Attributes

  • Quite motor operation with selectable 4, 6 or 8 kHz carrier frequency
  • 208-230 VAC, 380-460 VAC and 575 VAC three-phase input
  • 575 VAC three-phase input
  • 0.5 to 240 Hz three-phase voltage output
  • Standard on-board keypad and display
  • Frequency avoidance
  • Auto restart after fault
  • Reverse disable
  • 150% load for one minute
  • 500 millesecond power dip ride-through
  • UL/CSA electronic motor overload which meets NEC/CEC requirements